Weathershield Roof

Mid Sheen Finish

"A high durability acrylic emulsion paint specially formulated for appropriately primed new and old roofs "





Key Information

Coverage20 m²/5L

Drying Time2 - 3 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

A high durability acrylic emulsion paint specially formulated for appropriately primed new and old roofs, such as cement fibre sheets, unglazed cement/clay roof tiles, metal deck roofs as well as concrete or cement fibre pipes. It protects againts mould attack and colour fading.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

1 Start 2 Complete


  • Excellent colour fastness properties
  • Colourlock™ technology to ensure colour stay looking new for longer
  • Keep Cool™ heat reflective technology - Savings of up to 15% per annum on the energy used to cool your home and reduce exterior surface temperature by up to 5°C.
  • Excellent alkali resistance
  • Effective mould control
  • Singapore Green Label certified
  • Sirim Eco-Label certified

Tips & Advice

Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools
By roller, brush or conventional/airless spray.


Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%.
Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.