Weathershield Express

Sheen Finish

A premium quality acrylic waterbased paint specially formulated as a 2-coats system to give superior all-weather protection and durability to exterior walls.





Key Information

CoverageUp to 10 m²/L

Drying Time2 - 3 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

A premium quality, acrylic waterbased emulsion paint specially formulated to give superior all-weather protection and durability to exterior walls. Just two coats of Dulux Weathershield Express is required to obtain similar results as the usual 3 coats system, hence reducing labour time and paint wastage, and eventually, cost and speeding up the working process.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

1 Start 2 Complete


  • Excellent alkali resistance and adhesion properties
  • Excellent exterior durability and colour fastness
  • Allows user to skip Sealer application, simplifying the painting task
  • Reduces labour time, paint wastage and cost
  • Protection against fungus and algae growth
  • Keep Cool property (refer to colour palette)

Tips & Advice

Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools
By roller, brush or conventional/airless spray.

Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%.
Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.