Weathershield E1000 Sheen

Sheen Finish

High performance paint specially formulated to give superior all-weather protection and durability to exterior walls.





Key Information

Coverage10 - 12 m²/L

Drying Time2 - 3 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

High performance paint specially formulated to give superior all-weather protection and durability to exterior walls. It is a 100% acrylic water-based emulsion paint suitable for new and previously painted masonry surfaces which are appropriately primed. It has Keep Cool™ property and certified as a green label product.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

1 Start 2 Complete


  • Excellent alkali resistance and adhesion properties.
  • Excellent exterior durability and colour fastness.
  • Colourlock™ technology to ensure colour stay looking new for longer.
  • Keep Cool™ heat reflective technology - Savings of up to 15% per annum on the energy used to cool your home and reduce exterior surface temperature by up to 5°C.
  • Consists of dirt resistant property which enables the finish to stay clean and brighter longer.
  • Protection of at least 5 years against fungus and algae growth.
  • Meets Malaysian Standard MS 134:2007
  • Singapore Green Label certified
  • Sirim Eco-Label certified

Tips & Advice

Surface Preparation

Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools

By roller, brush or conventional/airless spray.


Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%. Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.