A water-based sealer for both exterior and interior masonry surfaces. It provides good adhesion.
Ask us anything related to this product. We will get back to you as soon as possible.Ask Us
A water-based sealer for both exterior and interior masonry surfaces. It provides good adhesion to the substrate and forms a barrier for better topcoat finishing.
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.
By roller, brush or conventional/airless spray.
DilutionReady to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%.
Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.