Diamond Refresh

Low Sheen Finish

A premium quality, odour neutralizing, anti-formaldehyde paint for interior walls.





Key Information

Coverage12 m²/L

Drying Time1 - 2 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

A premium quality, odour neutralizing, anti-formaldehyde paint. It basically neutralizes formaldehyde, a common indoor air pollutant. It also comes with fungus and mould resistance making it suitable for all indoor surfaces.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

1 Start 2 Complete


  • Neutralise formaldehyde and reduces the VOCs in the air – compiles with the JC/T 1074-2008 “Purification Performance test method of coatings On air purification.”
  • Low VOC – compiles with the Singapore Green Labelling and Sirim Eco-Label criteria
  • Superior washability
  • Anti-bacteria – complies to JIS Z2801 Anti-Microbial Test.
  • Mould and Fungus resistant.
  • Excellent alkali resistance and adhesion properties

Tips & Advice

Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose and defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Treat any areas affected by mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust. Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools
By roller, brush or conventional/airless spray.

Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%.
Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.